replace Broadcom NetXtreme Gigabit by LAN/SCSI core I/O

[meekrob]

Hi all,
i need your help in this issue.
i have a server rx7620 with one core I/O.in order to activate 4 internal disks i am trying to add the second Core I/O (MP/SCSI and LAN/SCSI).
refering to manuals i must have to install the LAN/SCSI in Chassis 0, slot 1.
now my problem is that there is a Broadcom NetXtreme Gigabit on Cahssis ) slot 1.
i tryed to relplace by the LAN/SCSI but i had an error
MCA EVENT occurred : SAL error processing

Logging XBC Errors ....
Size of XBC Errors : 0x0
and i can't attend to EFI.
how can i remove this card (Broadcom NetXtreme Gigabit
Ethernet) from this slot and replace it by the Lan/SCSI without getting a problem?

Thank you

[meekrob]

hi again,

what is the procedure to remove a card 'X' from a slot and replace it by a card 'Y'??
where y is another type from x

thank you

[Torsten.]

There was a similar thread last week, did you read this:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1148463

[meekrob]

thank you torsten,
yes i read it,but what i did i installed only the second MP/SCSI card on the server and i have the 4 internal disk activated with 2 different FW version.
what i am thinking about that when i replaced the NetXtreme Gigabit by the LAN/SCSI card on chassis 0 slot 1 the server was trying to read the configuration on this slot and he found the network card configuration with the LAN/SCSI Card. so it caused the problem .
so now i have the HPUX 11.23 installed on the server whith 1 partition
if there a way to remove the NetXtreme Gigabit card from this slot with its configuration befor i install the LAN/SCSI card, pleasse tell me.
PS i am facing a problrm on fw update because i have windows xp home edition on my laptop it not contains the iis. is there a way to update the firmware from UNIX?
Thank you for your help again, i need it

[Marcel Burggraeve]

If you need a FTP server on your Windows XP Home laptop have a look at filezilla server.
http://filezilla.sourceforge.net/

[meekrob]

Thank you