Integrity Servers

rp7420 Only Cell Board 1 Showing in Console

 
jcainb13
Occasional Contributor

rp7420 Only Cell Board 1 Showing in Console

Hi Everyone,

I have an rp7420 that only shows the information for cell board 1 when I run the information and then all command.

There are no errors and all lights including cell board 0's lights are all green. VFP also only shows cell board 1 joined the partition. 

It does show that cell board 0 is powered on. When I try to power it on within the MP it says the power is already on. 

I'd really appreciate any direction to include cell board 0 in the partition.

Thank you! 

1 REPLY 1
jsm6
HPE Pro

Re: rp7420 Only Cell Board 1 Showing in Console

Hello,

Does that mean, Cell 0 is not part of partition 0?

If yes and if you need it as a part of nPar 0 - you can always add it using hpux command "parmodify" (from current  Npar 0 OS).

Check syntax or man page for exact command to be used.

https://community.hpe.com/hpeb/attachments/hpeb/hpsc-46/1677/1/nPar.pdf   (Page 95)

Thanks and Regards.

I am a HPE Employee

Accept or Kudo