HPE Community
Integrity Servers
1751780 Members
4363 Online
108781 Solutions
New Discussion юеВ

rx 2620 system bus

 
SOLVED
Go to solution
Nabil Boussetta
Frequent Advisor

тАО05-10-2006 08:32 PM

тАО05-10-2006 08:32 PM

rx 2620 system bus

i have found in the rx2620 quick spec that system bus is 200 MHZ.
url for the quick spec is : http://h18000.www1.hp.com/products/quickspecs/12141_div/12141_div.HTML

another url says 400MHz FSB

http://www.hp.com/products1/servers/integrity/entry_level/index.html


what is the difference between tne two values.
0 Kudos
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО05-10-2006 09:52 PM

тАО05-10-2006 09:52 PM

Solution

Re: rx 2620 system bus

IMHO, you have to read it that way:

The CPU is able to do 400MHz on the FSB, but the system is using 200MHz.

(the second link mentions the frequency next to the CPU, the first mentions the particular system.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Nabil Boussetta
Frequent Advisor

тАО05-10-2006 10:44 PM

тАО05-10-2006 10:44 PM

Re: rx 2620 system bus

ok
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.