rx2600 Firmware Update Problem.

[Zulfiqar Hanif]

Hi,
I have a problem to upgrade the firmware for rx2600 server. the firmware version was 2.10 for MP. which i upgrade to 2.26 then 2.29 and the last sucessful update was 3.13
new i start the firmware upgrade to the latest version that is PF_CPEAKSYS0231CEFI.tar.gz which i got in internet. it have all firmware upgrades. it has System FW: 2.31 the previous was 1.61, BMC new is 1.53 and iLO MO is 3.32. the current is 3.13. before start the firmware its giving me the time that is 24 minutes. but now it is since 6 days and still its cooking something i don't know. i tried to power off by MP but it is failed also. i am afraid to remove the power. may be it will not come up again.
can anybody help me. i attached the MP log also.
thanks in advance.

[Torsten.]

How did you "power off" the MP?

What is the exact current status?

[Steven E. Protter]

Shalom,

I think it safe to say after six days, the process is dead.

Powering off the whole system is probably safe.

iLO will pretty much update to the latest version without issues.

MP, BMC may have intermediate steps. It does not look like you missed ont but that may be the case.

SEP

[Zulfiqar Hanif]

I tried to power off by MP command. under CM i user PC -OFF and PC -G but both are failed.
you can check the log file which i attached with my question earlier.

[Torsten.]

Most important: is the system alive?

[Torsten.]

... and what does "sysrev" show now?