Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx2600:Serial console cable configuration required.

 
Asim_5
Frequent Advisor

rx2600:Serial console cable configuration required.

We want to connect to MP via serial console cable.we want to prepare this cable but do not have the pin configuration. Can anybody forward us the pin configuration of this console cable (DB25 TO DB9).

Thanks.
2 REPLIES 2
Zygmunt Krawczyk
Honored Contributor

Re: rx2600:Serial console cable configuration required.

Hi Asim,

the DB25 connector on the MP is a special connector for three serial interfaces (Console, Remote Console, UPS). These interface can be accessed via included adapter HP A6144-63001 (dongle cable DB25(Male)-3xDB9(Male)) and a standard serial cable eg HP 5182-4794 (DB9(Female)-DB9(Female)). Pin assigments of the HP 5182-4794:

GND --- GND
1 --- 1
2 --- 3
3 --- 2
4 --- 6
5 --- 5
6 --- 4
7 --- 8
8 --- 7
9 --- 9

If you don't have HP A6144-63001 adapter, you can prepare special DB25(Male)-DB9(Female) serial cable for console connection.
The pin assigment should be:

DB9 --- DB25
GND --- GND (ground)
1 --- NC (not connected)
2 --- 2
3 --- 3
4 --- NC
5 --- 7
6 --- NC
7 --- 5
8 --- 4
9 --- NC

Regards,
Zygmunt

Prashant (I am Back)
Honored Contributor

Re: rx2600:Serial console cable configuration required.

Hi,

Do you have any HP doccument for the same infomration. Any internal or External site have same infomration.

Because i need to valdiate the same before proceeding with this.

Regards,
Prashant S.
Nothing is impossible