Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx2600 blank during boot up

 
SOLVED
Go to solution
giriplug
Frequent Advisor

rx2600 blank during boot up

Hi all,

My customer got a problem with their rx2600,this box is preloaded with 11iv2.We could not boot up using the c1064g and a normal monitor.It is just blank and i cant see the EFI at all.According to the website,it is said that 11iv2 has a default console setting.Is this the cause of this problem?Just need some information here....

thx in advance....
raj
5 REPLIES 5
Arunvijai_4
Honored Contributor

Re: rx2600 blank during boot up

Hi Raj,

You can connect to console using serial port and by default, You have to set IP address for MP. While connecting to MP from a PC, use Admin/Admin

-Arun
"A ship in the harbor is safe, but that is not what ships are built for"
Sivakumar TS
Honored Contributor
Solution

Re: rx2600 blank during boot up


Hi,

Connect a dumb terminal / serial connection-hyperterminal to the MP serial port...

the settings are

9600-8-N-1

login :

Admin/Admin

from here you can get in and configure
MP IP interface using

MP>CM>LC

and after entering into EFI you can configure the OUTPUT DEVICE also.

With Regards,

Siva.
Nothing is Impossible !
Devender Khatana
Honored Contributor

Re: rx2600 blank during boot up

Hi,

You can connect to the console port of the W-cable using serial cable. After doing this once you can configure MP, after doing that you can use the IP assigned to MP to logon to console.

HTH,
Devender
Impossible itself mentions "I m possible"
Lolupee
Regular Advisor

Re: rx2600 blank during boot up

Dis you rcustomer purchase the MP console option with the Box? If they did them you can connect the W cable and identify the console cable from the w-cable.

Connect the Console cable to serial port of the terminal. Make sure the console terminal is set all to default, this always work for HP terminal consoel.

Please follow this link for further help
http://docs.hp.com/en/5187-2725/index.html
giriplug
Frequent Advisor

Re: rx2600 blank during boot up

problems solved....thx a lot guys...