rx2600 display prob

[Mohanan Nair]

Hi

I am setting up a new rx2600 server with 1g mem/2 cpu.

I am getting only a cursor on the vga display?
All LED indications are ok as per documentation

What could be the problem.

I havent tried the serial option yet as i understand vga is the default

Any guidence is appreciated

MOHAN

[Zygmunt Krawczyk]

You should also connect USB keyboard and USB mouse to the USB ports labeled keyboard and mouse.

Regards,
Zygmunt

[Mohanan Nair]

I have already connected the kbd and mouse

Kind regards
MOHAN

[Zygmunt Krawczyk]

Hi,

read the doc:

"Default Console: hp integrity rx2600 Server"
http://h200007.www2.hp.com/bc/docs/support/SupportManual/c00112286/c00112286.pdf

If you are using HP-UX, you should connect to MP (or ECI) serial console port. Then you can configure IP address on LAN console port and use telnet for console access.

Regards,
Zygmunt

[Ted Buis]

At the EFI prompt, configure the input and output devices. Or try boot vmunix -vga

[Mohanan Nair]

thanks all for the inputs.

The console was set to serial. i reverted back to vga and the problem solved.

thanks once again