Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx2600 display prob

 
Mohanan Nair
Occasional Contributor

rx2600 display prob

Hi

I am setting up a new rx2600 server with 1g mem/2 cpu.

I am getting only a cursor on the vga display?
All LED indications are ok as per documentation

What could be the problem.

I havent tried the serial option yet as i understand vga is the default

Any guidence is appreciated

MOHAN
5 REPLIES 5
Zygmunt Krawczyk
Honored Contributor

Re: rx2600 display prob

You should also connect USB keyboard and USB mouse to the USB ports labeled keyboard and mouse.

Regards,
Zygmunt
Mohanan Nair
Occasional Contributor

Re: rx2600 display prob

I have already connected the kbd and mouse

Kind regards
MOHAN
Zygmunt Krawczyk
Honored Contributor

Re: rx2600 display prob

Hi,

read the doc:

"Default Console: hp integrity rx2600 Server"
http://h200007.www2.hp.com/bc/docs/support/SupportManual/c00112286/c00112286.pdf

If you are using HP-UX, you should connect to MP (or ECI) serial console port. Then you can configure IP address on LAN console port and use telnet for console access.

Regards,
Zygmunt
Ted Buis
Honored Contributor

Re: rx2600 display prob

At the EFI prompt, configure the input and output devices. Or try boot vmunix -vga
Mom 6
Mohanan Nair
Occasional Contributor

Re: rx2600 display prob

thanks all for the inputs.

The console was set to serial. i reverted back to vga and the problem solved.

thanks once again