Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx2600 smart array 6400 orca

 
John Dobbins_1
Occasional Advisor

rx2600 smart array 6400 orca

How do I change the partition size of a logical drive in orca? When I enter orca, I can only create one logical drive of maximum size and see no option to change its size.

jdobbins
6 REPLIES 6
Andrzej Kowalik
Honored Contributor

Re: rx2600 smart array 6400 orca

You can change parameters of logical drive(s) using Array Confoguration Utility only.
Other words - you cannot change it via ORCA.
regards,
Andrzej
John Dobbins_1
Occasional Advisor

Re: rx2600 smart array 6400 orca

Then let me ask the question.....How do I run ACU before loading an OS on IA64?

jdobbins
Andrzej Kowalik
Honored Contributor

Re: rx2600 smart array 6400 orca

Hmm,
If I know, you not have option to run ACU (if you use SA6400 as boot controller), and also not have option to change partition size...
regards,
Andrzej

Re: rx2600 smart array 6400 orca

Hi John Dobbins ,

If you want to installed Array Configuraion utility and IMA, it is available following site.

ULR:http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=448026&taskId=135&prodTypeId=15351&prodSeriesId=447335〈=en&cc=us&swEnvOID=1060#3151

Thanks and Regards
Suresh.P
John Dobbins_1
Occasional Advisor

Re: rx2600 smart array 6400 orca

So is there no ACU that can run before an OS is loaded?

jdobbins
Andrzej Kowalik
Honored Contributor

Re: rx2600 smart array 6400 orca

I not heard about such version for IA64...