cancel
Showing results for 
Search instead for 
Did you mean: 

rx2600

 
SOLVED
Go to solution
Jon Steele
Valued Contributor

rx2600

Is there a way to upgrade the efi firmware on the rx2600?we have 1.10 now.

Thanks
Jon
5 REPLIES 5
Torsten.
Acclaimed Contributor
Solution

Re: rx2600

EFI is part of the firmware (it is included).

Check if you need to upgrade the systems firmware.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
tkc
Esteemed Contributor

Re: rx2600

The rx2600 system has firmware for MP, BMC and System FW. Are you referring to this firmware? The firmware is located in :

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=447335&swItem=ux-46490-1&prodNameId=88839&swEnvOID=54&swLang=13&taskId=135&mode=3

If not, there are EFI drivers for different type of adapters in an Integrity server. If you are looking for EFI driver for the A6795A Fibre Channel Adapter, it is located here :

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&prodTypeId=15351&prodSeriesId=447335&swItem=ux-51838-1&mode=4&idx=1
Sameer_Nirmal
Honored Contributor

Re: rx2600

I think you are referring to EFI F/W as in "sysrev" command result like
MP FW : E.03.30
BMC FW : 01.53
EFI FW : 01.22
System FW : 02.31

The EFI FW is included in SFW besides EFI drivers. So to update EFI FW, you need to make use of the SFW FW. Moreover it is recommended to upgrade other firmwares like BMC and iLO MP as there are compatible/qualified with each other
Server_4
Occasional Visitor

Re: rx2600

HI.. the EFI Fw Version is older version Fw needs to updated please follow the link given in the above msg and download below version Fw,
EFI FW : 01.22

Steps to update:
The Extensible Firmware Interface (EFI) Image solution is an offline firmware update process for HP Integrity systems.
It provides the user with written procedures, which guides the user through step-by-step instructions such as copying the EFI image onto an EFI disk partition, shutting down the system, and then running the EFI image to update the firmware at the EFI boot Manager.
Jon Steele
Valued Contributor

Re: rx2600

Thank you
Jon