HPE Community
Integrity Servers
1753404 Members
7228 Online
108793 Solutions
New Discussion юеВ

rx2620 disk issue

 
Robert Popola
New Member

тАО05-07-2008 07:53 AM

тАО05-07-2008 07:53 AM

rx2620 disk issue

I have a issue where I have 2 disk which were working in another rx2620. I put them in the new rx2620 and the show up but with no info. Meaning the are 146gb but show 0.0. In EFi they show as 0005error. Cannot Determine Disk Capacity. Any help would be great. I am windows admin working my way through hp-ux.
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО05-07-2008 10:43 AM

тАО05-07-2008 10:43 AM

Re: rx2620 disk issue

A copy of the output would be better.

If still at EFI prompt, please run

> reconnect -r
> map -r
> info all

and post the output.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Robert Popola
New Member

тАО05-07-2008 12:05 PM

тАО05-07-2008 12:05 PM

Re: rx2620 disk issue

Thanks for the response. It seems the problem was that the disks were used with oracle ASM. I put them in a Dell server and did a low level format. Then put them back into the rx2620 and they work fine now.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.