Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx2660 iLO 2 configuration backup

 
SOLVED
Go to solution
ianvt
Advisor

rx2660 iLO 2 configuration backup

I need to replace a rx2660 system board and so need to backup the iLO 2 MP configuration. Any suggestions?
6 REPLIES 6
Torsten.
Acclaimed Contributor
Solution

Re: rx2660 iLO 2 configuration backup

Note down the values (IP and users) and put them into the new MP.

No other possibility.

e.g.

MP:CM> ls

MP:CM> uc


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
S_Logan
HPE Pro

Re: rx2660 iLO 2 configuration backup

Hi,

In Entry level servers we dont have a option!

In Supedomes we can sawpping the flash card will keep the settins!
I work for HPE

Accept or Kudo

cnb
Honored Contributor

Re: rx2660 iLO 2 configuration backup

Torsten.
Acclaimed Contributor

Re: rx2660 iLO 2 configuration backup

That's not bad, it saves at least all the boot entries - sorry, forgot about this.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
cnb
Honored Contributor

Re: rx2660 iLO 2 configuration backup

Yeah, it would have saved me about 2 hours of figuring out what the old paths and settings were supposed to be at.

Live and learn...

;-)

Rgds,

ianvt
Advisor

Re: rx2660 iLO 2 configuration backup

Thanks for the reply's. I'm going to do the job on Monday. I have the NVRAM backup utility, was just wondering if there was an easy way of saving the iLO config. Clearly there is not.
Thanks
Ian