rx2660 unable to boot

[Patrick B Boafo]

cannot ping nor telnet to server. connected to console and message display is attached.

***********************************************************
0 0 0x0015B2 0x0000000018334129 boot time event
1 0 0x0000A4 0x0000000000000000 start memory configuration
2 0 0x001CBB 0x0000000000000000 System set to insecure mode
0 0 0x0015B2 0x0000000021679210 boot time event
1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation
1 0 0x000009 0x0000000000000000 CPU0 launch EFI
***********************************************************
* ROM Version : 03.01
* ROM Date : 09/26/2007
* BMC Version : 05.21
***********************************************************
0 0 0x0015B2 0x0000000018154814 boot time event
1 0 0x0000A4 0x0000000000000000 start memory configuration
2 0 0x001CBB 0x0000000000000000 System set to insecure mode
0 0 0x0015B2 0x0000000021489858 boot time event
1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation
1 0 0x000009 0x0000000000000000 CPU0 launch EFI


Also noticed this message after some minutes. "BMC Event log is full"

what do i do to bring system up?

[Steven Schweda]

> [...] connected to console [...]

Connected what, how, to which "console"?
Are you looking at the wrong serial port?
What is the system using as a console?

> Also noticed this message after some
> minutes. "BMC Event log is full"

Google has noticed it, too. A Web or Forum
search for it should find many things.

[lbseraph]

You had better to minimum system test, confirm which part caused the problem.

What I met same symptom one time is caused by the DVD-ROM, so you can plug out the DVD-ROM firstly and try to bootup again.