Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx3600 problem with LSI SAS

 
Highlighted
iLuke
Occasional Advisor

rx3600 problem with LSI SAS

I just got used rx3600 i have four disks in it.. and i'm trying to configure internal LSI SAS.

So i go to EFI Shell and run: drvcfg -s

This brings up LSI configuration utility.. but when i select controler and hit Enter the my LCD screen connected to server goes black and System Health LED starts flashing RED.. then machine restarts itself and System Health LED is amber.... if i pull the plugs and fire up machine again.. System Health LED is OFF...

 

what is wrong?

2 REPLIES 2
iLuke
Occasional Advisor

Re: rx3600 problem with LSI SAS

Okay if i remove all hard disks from the server and run drvcfg -s it works.. i can get into configuration utility without reboot...

 

if i put all four drives back to server and do drvcfg -s and i select SAS controler and hit Enter i get stuck at:

 

reading non-volatile settings... 

 

and server reboots.

iLuke
Occasional Advisor

Re: rx3600 problem with LSI SAS

i figured it out.. one hard drive is bad.