HPE Community
Integrity Servers
1751934 Members
4778 Online
108783 Solutions
New Discussion юеВ

rx4640 doesn't boot

 
SOLVED
Go to solution
Igor Sovin
Super Advisor

тАО04-29-2005 12:46 AM

тАО04-29-2005 12:46 AM

rx4640 doesn't boot

Need help!

My situation is the same
as the following
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=679760

server has a cyclic reboot
0 Kudos
Reply
3 REPLIES 3
Ian Vaughan
Honored Contributor

тАО04-29-2005 03:00 AM

тАО04-29-2005 03:00 AM

Re: rx4640 doesn't boot

Howdy,
I'm sure that I had the same thing with an rp4440. I powered it down from the MP menu PC command and then unplugged it to ensure that Management Processor was completely down. Plugged all back together & restarted and it was OK.
Hope this helps.
Ian
Hope that helps - please click "Thumbs up" for Kudos if it does
## ---------------------------------------------------------------------------##
Which is the only cheese that is made backwards?
Edam!
Tweets: @2techie4me
0 Kudos
Reply
Kent Ostby
Honored Contributor

тАО05-06-2005 12:24 AM

тАО05-06-2005 12:24 AM

Re: rx4640 doesn't boot

If you are getting the "Alert Level 7s" that are mentioned in the other thread, that means that your box is HPMCing continually.

The power cycle suggest previously may help in that it may reset the HW enough for it to go through self test and fail in a more normal way.

If the problem persists, I would contact HP Hardware.
"Well, actually, she is a rocket scientist" -- Steve Martin in "Roxanne"
0 Kudos
Reply
viperlsm
New Member

тАО09-20-2005 03:35 PM

тАО09-20-2005 03:35 PM

Solution

Re: rx4640 doesn't boot

Experienced the error b4.. Try booting with all your PCI cards removed. Good luck..
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.