Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx4640 doesn't boot

 
SOLVED
Go to solution
Igor Sovin
Super Advisor

rx4640 doesn't boot

Need help!

My situation is the same
as the following
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=679760

server has a cyclic reboot
3 REPLIES 3
Ian Vaughan
Honored Contributor

Re: rx4640 doesn't boot

Howdy,
I'm sure that I had the same thing with an rp4440. I powered it down from the MP menu PC command and then unplugged it to ensure that Management Processor was completely down. Plugged all back together & restarted and it was OK.
Hope this helps.
Ian
Hope that helps - please click "Thumbs up" for Kudos if it does
## ---------------------------------------------------------------------------##
Which is the only cheese that is made backwards?
Edam!
Tweets: @2techie4me
Kent Ostby
Honored Contributor

Re: rx4640 doesn't boot

If you are getting the "Alert Level 7s" that are mentioned in the other thread, that means that your box is HPMCing continually.

The power cycle suggest previously may help in that it may reset the HW enough for it to go through self test and fail in a more normal way.

If the problem persists, I would contact HP Hardware.
"Well, actually, she is a rocket scientist" -- Steve Martin in "Roxanne"
viperlsm
Occasional Visitor
Solution

Re: rx4640 doesn't boot

Experienced the error b4.. Try booting with all your PCI cards removed. Good luck..