Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx5670 MFG mode password

 
Joshua Scoggins
Occasional Advisor

rx5670 MFG mode password

Hello,

I just replaced the main system board on my RX5670 as the 12v rails were out and now the EFI will not allow me to choose anything but the efi shell as I am getting Error[55] which says invalid or inaccessible system id(s). I tried to use

sysmode service
sysset uuid

but it gives me an access denied due to it already being set, it is not set to magic.

When I do

sysmode mfg it asks me for a password but no challenge phrase to verify against sskey. Is there a default password for mfg or is generated differently for each board?
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: rx5670 MFG mode password

What does this show?

Shell> sysmode service

Shell> sysset

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Joshua Scoggins
Occasional Advisor

Re: rx5670 MFG mode password

Alright here is the sysset output:

System Information:
Manufacturer: hp
Product Name: server rx5670
Product Number: AB213A
Secondary Product Number is Valid - Different
Serial number: 4435A18914
Secondary Serial Number is Valid - Different
UUID: 7EFF6E57-1662-11D9-808B-35D3D8C23E6B (Valid)
Secondary UUID is Valid - Different
Product ID: 0x201
Torsten.
Acclaimed Contributor

Re: rx5670 MFG mode password

There is nothing you can do, except call HP support.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!