Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx6600 Windows convert to HP-UX

 
Ed Velasco
Occasional Advisor

rx6600 Windows convert to HP-UX

Hi,

We have an Integrity RX6600 currently running Windows 2003. Can we convert this to HP-UX OS? Do we need to change something in the hardware if we do this?

Thanks,
Ed
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: rx6600 Windows convert to HP-UX

If you have an P600 smartarray controller you need to change this HBA, because it supports only windows and linux, but not hp-ux.


Otherwise just install hp-ux (11.23 or better 11.31).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Zygmunt Krawczyk
Honored Contributor

Re: rx6600 Windows convert to HP-UX

Chceck also your other I/O cards (LAN,FC) if they are supported by HP-UX. The list of supported I/O cards is available in the quic spec

http://h18006.www1.hp.com/products/quickspecs/12596_div/12596_div.HTML

If the server has PCI-Express I/O backplane, you need to change MPS Optimization parameter to Enable from EFI shell.