Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx7620 with new cell board does not boot

 
SOLVED
Go to solution
Arnulf Gercke
Frequent Advisor

rx7620 with new cell board does not boot

Hi,
I'm new to this forum and to the integrity servers. There's an rx7620 box with 1 cell board with 4x 1.5 GHz CPU. The cell board was replaced with a new one that has 4x 1.6 GHz CPU. The board is shown in mp, but OS (Win2k3)does not boot. So we turned back to the cell board with the 4x1.5 CPUs and there was no problem.
I think it has to do with Firmware Revisions,
and I found this patch: PF_COLYEIG0301. But I couldn't found our symptom in the description.
Is this patch the solution? Any other hint is greatly appreciated!
Arnulf
2 REPLIES 2
kris rombauts
Honored Contributor
Solution

Re: rx7620 with new cell board does not boot

Hi Arnulf,

check via the MP with either the VFP command at what stage the new cell board stops or via the SL commandand then FPL and check their for the last couple of messages since the last boot, any entry higher then severity level 2 needs to be looked at closely.

I would prefer you get in touch with HP support on this and get the RX7620 updated to the last system F/W i.e.



HTH

Kris
Arnulf Gercke
Frequent Advisor

Re: rx7620 with new cell board does not boot

Complete FW update with PF_COLYEIG0301 solved
the problem.