Integrity Servers
1748058 Members
5228 Online
108758 Solutions
New Discussion

Re: errors showing only one CPU!

 
SOLVED
Go to solution
wimaxpole
Occasional Advisor

Re: rx7640 showing only one CPU!

One more question before I reboot. In the syslog I am getting an error log like below. Will the command mentioned in the log is usefull?

node2 EMS [9299]: ------ EMS Event Notification ------ Value: "MAJORWARNING (3)" for Resource: "/system/events/ipmi_fpl/ipmi_fpl" (Threshold: >= " 3") Execute the following command to obtain event details: /opt/resmon/bin/resdata -R 609419266 -r /system/events/ipmi_fpl/ipmi_fpl -n 609419265 -a
S_Logan
HPE Pro

Re: rx7640 showing only one CPU!

Hi ,

 

Please check this thread for more infromation:

 

http://h30499.www3.hp.com/t5/General/If-probelm-is-serious/td-p/4273051#.UFL6No0gfCc

 

HTH,

Surendar

Was the post useful?

Say Thank you by Clicking the WHITE KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/hpgt

 

I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
wimaxpole
Occasional Advisor

Re: rx7640 showing only one CPU!

Today I had a chance to check MP logs but not able to reboot the server.  Is it because of the error the other  CPU is not visible to OS?

 

 

[node2] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [node2] -
Log Entry 6241:    05/05/2012 04:22:31
Alert level 2:  Informational
Keyword:  CELL_INTGRT_POLICY
The Cell Integration Policy is being reported
Reporting Entity:  System Firmware located in cabinet 0, slot 1, cpu 0
Actual Data:  0x0000000000000000
0x43800efe10e005b2 0x0000000000000000
0x4b000efe10e005b3 0x010000004fa4ab07

Log Entry 6240:    05/05/2012 04:22:31
Alert level 3:  Warning
Keyword:  CELL_HW_DEGRADED
A dimm or CPU has been deconfigured or failed testing
Reporting Entity:  System Firmware located in cabinet 0, slot 1, cpu 0
0x6b000efd10e005b1 0x010000004fa4ab07

Log Entry 6264:    07/10/2012 13:46:28
Alert level 3:  Warning
Keyword:  INLET_OVERTEMP_LO
Ambient Air Sensor Overtemp Warning
Reporting Entity:  Power Monitor located in cabinet 0
0x6b000b0c00e005d7 0x010000004ffc3234
S_Logan
HPE Pro

Re: rx7640 showing only one CPU!

Hi,

 

I could see the error logged at 5th May..

 

Log Entry 6240:    05/05/2012 04:22:31 <<<<<
Alert level 3:  Warning
Keyword:  CELL_HW_DEGRADED
A dimm or CPU has been deconfigured or failed testing
Reporting Entity:  System Firmware located in cabinet 0, slot 1, cpu 0

0x6b000efd10e005b1 0x010000004fa4ab07

 

Is this system showing CPU issue from that day (5th May)?

 

HTH,

Surendar

Was the post useful?

Say Thank you by Clicking the WHITE KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/hpgt

 

 

I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
wimaxpole
Occasional Advisor

Re: rx7640 showing only one CPU!

Yes, this node is showing only one CPU (two cores) and this error is still there till last reboot.
S_Logan
HPE Pro
Solution

Re: rx7640 showing only one CPU!

Hi,

 

If you get a downtime of this server, reboot the server and go in to the EFI shell and run the following commands to confirm the CPU Deconfiguration:

 

EFI Shell>info cpu

EFI Shell >cpuconfig

 

If you see any CPU deconfigured state. Please log a Hardware ticket with HP for further assistance.

 

 

HTH,

Surendar

Was the post useful?

Say Thank you by Clicking the WHITE KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/hpgt

I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
wimaxpole
Occasional Advisor

Re: errors showing only one CPU!

Thanks for all..

It was due the CPU  cooling FAN which failed during the first few minutes of power up. I replaced the FAN after few tries and system is working till now.

 

Bye..