rx7640

[Jon Steele]

I have an rx7640 that works fine with these AB584A procs in it. I take those out and put in AD365A procs in which are the same speed but newer procs but the machine does not boot up anymore. I can put the other ones back in and the machine works fine. Does anyone know why the AD365A procs will not work?

Thanks
Jon

[Torsten. · Accepted solution]

Please check the firmware first:

VERSION: rx8640/rx7640 and SEU (AB301A) Firmware Version 4.1

Programmable Hardware:

System Backplane GPM : 001.002.000 System Backplane EMMUX : 001.000.000 IO Backplane IO_LPM-0 : 001.004.000 IO Backplane IO_LPM-1 : 001.004.000 Core IO CIO : 001.002.000 Cell_LPM : 001.002.000 Cell_JTAG : 001.002.000 Cell_PDH : 001.005.001Firmware:
Core IO MP : B.004.001.001 Core IO ED : 002.011.000 Cell PDHC : B.023.003.040 Cell IPF_FW : 009.048.000

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1844075&swItem=ux-64551-1&prodNameId=1844076&swEnvOID=54&swLang=13&taskId=135&mode=4&idx=1

[Torsten.]

bad format, I try again:

System Backplane GPM : 001.002.000
System Backplane EMMUX : 001.000.000
IO Backplane IO_LPM-0 : 001.004.000
IO Backplane IO_LPM-1 : 001.004.000
Core IO CIO : 001.002.000
Cell_LPM : 001.002.000
Cell_JTAG : 001.002.000
Cell_PDH : 001.005.001
Firmware:
Core IO MP : B.004.001.001
Core IO ED : 002.011.000
Cell PDHC : B.023.003.040
Cell IPF_FW : 009.048.000

[Jon Steele]

Thank you
Jon