Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx8640 - Memory configuration

 
SOLVED
Go to solution
Gene Laoyan
Super Advisor

rx8640 - Memory configuration

We have an rx8640 and want to upgrade the RAM. Currently it is populated with 8 2GB sticks.
My question is, can we populate the available slots with 4GB sticks without voiding any warranty or anyting, basically mix & match sizes. These will be HP sticks that we purchase.
Will there be be any performance hits?

Thanks
12 REPLIES 12
Steven E. Protter
Exalted Contributor

Re: rx8640 - Memory configuration

Shalom,

There will be no performance hits adding memory that is certified for the rx8640 to empty memory slots.

Note that they have to be added in pairs.

See the documentation in http://docs.hp.com for this system for details on memory and upgrades.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Gene Laoyan
Super Advisor

Re: rx8640 - Memory configuration

Could you confirem that 64GB is the MAX memory that can be installed?

Thanks
Highlighted
Pete Randall
Outstanding Contributor

Re: rx8640 - Memory configuration

According to my trusty "Hardware @ a Glance" chart, the max for the 8640 is 256GB.


Pete

Pete
Pete Randall
Outstanding Contributor

Re: rx8640 - Memory configuration

I should add that, obviously, 256GB in 32 slots means that you're using something larger than 4GB sticks - roughly 8GB, I would guess.

And you have to add the larger sticks in the lowest numbered slots, by the way.


Pete

Pete
Sandman!
Honored Contributor

Re: rx8640 - Memory configuration

Gene Laoyan
Super Advisor

Re: rx8640 - Memory configuration

OK, now I am confused. In a previous post: http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1151317 I ran a command that shows there are 32 slots and 8 are used. In the web page I was directed to it shows there are 16 slots total: see figure 1-9: http://docs.hp.com/en/AB297-9007C/ch01s01.html#d0e990

Which is it? We need to buy more RAM but need to know the density to properly populate all 4 nPars to at least 32GB of RAM. Currently there's 16GB.

Thanks everyone.
Pete Randall
Outstanding Contributor

Re: rx8640 - Memory configuration

It definitively states 256GB on these specs:

http://h20341.www2.hp.com/integrity/cache/340168-0-0-0-121.html


Pete

Pete
Sandman!
Honored Contributor

Re: rx8640 - Memory configuration

Is this server an nPar? You may have two cell boards in the machine which are coupled together to form a single nPar. Each cell board has 16 DIMMs which can be populated by 1 2 4 or 8 GB DIMMs.

~hope it helps
Gene Laoyan
Super Advisor

Re: rx8640 - Memory configuration

Yes it is an nPar. We want to upgrade memory on all 4 nPars to at least 32GB each. Will we need to purchase 8 2GB sticks for each nPar or 4 4GB sticks for each nPar?