rx8640 Server Expansion

[MárcioAFM]

Hello,

I have installed a expansion server, and then i substituted two pci card's for new pci cards, after this the PCI slot never power up again!

Someone have ideas?

Regards,
Marcio

[Vihang.]

Hi Marcio,

Which cards have you installed? Are these cards supported on the server?


Regards,
Vihang.

[Phil uk]

Hi,

Need a little more info:

What type of cards and from which slots did you REMOVE
...and what type of cards and into which slots did you INSTALL.

Please post the firmware versions from the CM prompt of the MP using SYSREV

Also, post a PS from the MP CM prompt, and the MP SL Error logs.

Are you sure the cards are compaptible with the SEU (Slot voltages, card voltages etc)?

Have you checked that you have closed the (usually blue) latches for the slots?

Regards,
Phil

[MárcioAFM]

Hello


The problem was wioth the E_link cables.


Thanks you,

Regards,

Márcio