sam can not start normal

[singvey]

when I try to run sam,system told me an internal error occored:
I saw the /var/sam/log/samlog:
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1123465820@0
Mon Aug 8 09:50:20 2005 Entering SAM area "System Administration Manager (hp
)".
@!@8@1123465822@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1123465823@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:717] was not found in the internal error table.Lo
cation: arch_err_handler.C:256Error Code: 5000

[Joseph Loo]

hi,

what prompted this message when u run sam, i.e. swinstall, ioscan, e.g?

in other words, what were u trying to run from sam?

regards.

[Cheryl Griffin · Accepted solution]

Try swconfig then sam again:
# swconfig \*

If you continue to get the error, copy a clean set of the sam files back over to /etc/sam:
# cd /etc/sam
# mv reg_da.db reg_da.db.old
# mv reg_files.db reg_files.db.old
# mv reg_tm.db reg_tm.db.old
# cp -p /usr/newconfig/etc/sam/reg* /etc/sam

[singvey]

I try swconfig \* , success


thank you

[singvey]

thanks a lot