sas disks on rx2660

[Ludovic Derlyn]

Hi,

I have an probe with sas disks
Some disks has been changed , and i have some mistakes between capacity and location

in attachment , results of drvcfg -s and ioscan -fnC disk
disk 0F 146G are located in enclosure 3 and 7 but see in 2 and 4

how to correct it ?
thanks

[Ludovic Derlyn]

hi

other error :

sasmgr get_info -D /dev/sasd0 -q lun=all
Driver specific and common library version mismatch. Exiting..

[Michal Kapalka (mikap)]

hi,

check this link :

http://docs.hp.com/en/5992-4874-2/5992-4874-2.pdf

search for your error message :

"Driver specific and common library version mismatch. Exiting.."

mikap

[Panagiotis Tzolio]

Hello all,

I have faced the same problem and I planning to install the same software in my server.
I have also downloaded the installation instructions and there is no reference for restart of the server after the installation.
Is there any need or I just install the software without problem?

Thanks in advance for your help.

Best regards,
Panagiotis.

[S_Logan]

Hi Ludovic,

Is the system using RAID?

when did it happen? was the disk replacement carried out successfully ?

[S_Logan]

Hi Ludovic,
I could see the disk are not involved in ANY RAID.

Please update the SAS driver and firmware to the latest

SAS Firmware:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3346452&prodNameId=3346456&swEnvOID=54&swLang=13&mode=2&taskId=135&swItem=ux-70290-2

SerialSCSi Driver:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=SerialSCSI-00

CommonIO driver:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=CommonIO

HTH ,

Surendar


Note: If you are the author of this question and wish to assign points to any of the answers, please login and assign points.
For more information on assigning points ,click here :
http://forums11.itrc.hp.com/service/forums/helptips.do