Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

server Integrity screen white and blue

 
Manuel_Luffy
Occasional Visitor

server Integrity screen white and blue

hi

I am new in this job of managing servers, there is a server HP integrity rx2800 i4 that has installed an HP-UX operating system but when I turn only aparce hp screen in white and blue, do not let me make a boot.
I tried to connect via telnet and ssh with putty but not connect
Connect a serial cable to a lap top but does not identify
I could help please tell me how to boot

1 REPLY 1
Bill Hassell
Honored Contributor

Re: server Integrity screen white and blue

Is the server's power light green? Are there any error lights on the server?

For a keyboard-video-mouse (KVM) connection, you may need to connect to the console either through the serial port or the LAN cable and setup KVM rather than wired console.

For telnet, you must have a cable plugged into the console port in the back. This is different than the other ports which are controlled by HP-UX after it is booted. If there is a cable, do you know the IP address of the console? This should have been setup when your server was installed.

For a serial connection, you probably need a null-modem cable or adapter. Most serial cables are designed to plug into modems, not servers. To request the console prompt, type ctrl-B



Bill Hassell, sysadmin