Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

setup rx2620 to boot from brocade san for RHAS 4.0 and Suse sles 9.

 
ecorban
Frequent Advisor

setup rx2620 to boot from brocade san for RHAS 4.0 and Suse sles 9.

Hi

How do i setup an rx2620 host to install and boot over brocade san using a6826a, knowing that all the san related stuff zoning and access to storage is correct. I just need to know how to setup 6826a to select san lun and install and boot from it.

a quick reply is really helpful.
thanks
4 REPLIES 4
Antoniov.
Honored Contributor

Re: setup rx2620 to boot from brocade san for RHAS 4.0 and Suse sles 9.

Eddie,
about SAN question, you can ask to SAN gurus here
http://forums1.itrc.hp.com/service/forums/categoryhome.do?categoryId=248

Antonio Vigliotti
Antonio Maria Vigliotti
ecorban
Frequent Advisor

Re: setup rx2620 to boot from brocade san for RHAS 4.0 and Suse sles 9.

its installs ok with redahat AS4.0 but when it tries too boot it cannot find the new hsv210 root disk. when you run

shell:>connect

map -r

it doesnot show the hsv210 disk as /HD, just blk stuff
Antoniov.
Honored Contributor

Re: setup rx2620 to boot from brocade san for RHAS 4.0 and Suse sles 9.

Eddie,
if shell:> means EFI, do you see SAN disk with dh command?
EFI>dh -b
If you see SAN disk, look at handle of device then create manually map
EFI>map fs
Example:
EFI>dh -b
...
9C brocade san
...
EFI>map fs4 9C

Antonio Vigliotti
Antonio Maria Vigliotti
Antoniov.
Honored Contributor

Re: setup rx2620 to boot from brocade san for RHAS 4.0 and Suse sles 9.

Sorry,
I did'nt read your lats post carefully.

it doesnot show the hsv210 disk as /HD, just blk stuff

You cam simply mount filesystem
EFI>map -d fs0
EFI>mount blk fs0

Antonio Vigliotti
Antonio Maria Vigliotti