time and date on MP Console ( rx4640)

[Igor Sovin]

How to modify time on MP?

[Arunvijai_4]

Hi Igor,

This is the Service Processor User's guide,

http://docs.hp.com/en/A5201-90017/index.html

Hope this helps you to find command to modify time thro MP.

-Arun

[Sameer_Nirmal · Accepted solution]

Hi,

Check up through MP interface.
MP -> CM -> DATE

Be aware in Integrity Server, MP usually use BMC as source of date. MP uses its own RTC when it is first powered on or rebooted until the correct date is obtained from BMC.
Refer this link
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00307512/c00307512.pdf

So the bottom line, the server uses BMC RTC as main source of system date and time. If the BMC date/time is invalid, system would pop-up an error message during server bootup (before OS bootup). In this case one has to set the system date and time in EFI shell interface.
efi> date
efi> time

Refer this link
http://docs.hp.com/en/A5201-90017/apbs02.html?btnNext=next%A0%BB

[Igor Sovin]

thanks guys!