va7410 & windows2003(IA64)

[mark.M]

OS : windows2003(IA64) 2Node
Storge : VA7410
Env : HP SAN switch
Command View SDM is installed Windows2003(64bit) server
All Lun is delete.. but i'm not seen for VA
why???
Command view reinstalled but now state..jpg
before i'm see disk & Lun but why All Lun delete .... i'm not see...????
please.....

[Mario_66]

Hi,

do you have LUN 0? There should be at least one LUN as a command device.

Maybe someone will correct me if I am wrong.

M.

[Torsten.]

Nice picture!

It's not clear: Did you delete the LUNs?

You'll need a LUN 0 configured, without the server can't find the array. Connect a laptop to the serial port and create a LUN 0 ~20MByte.
Check if there is secure manager on the VA configured or WWN-zoning on the switch. These things may prevent the detection of the array.

[mark.M]

do you have VA7410 manaual??
is va7410 Lun0 need? only need va70xx?
i will promise monday work.. but i don't know

[Torsten. · Accepted solution]

You can download the latest Commandview SDM software from here:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=30591&taskId=135&prodTypeId=18964&prodSeriesId=64112〈=en&cc=us

Select version 1.09.01!

At least in the windows package there is a documentation.

Regarding LUN 0:

...
Many operating systems rely on the presence of LUN 0 to establish a
communication path to all LUNs on the array. Consequently, it is
recommended that the array always have LUN 0 present.