- Community Home
- >
- HPE Community, Taiwan
- >
- 伺服器
- >
- Itanium 伺服器
- >
- Smart Array 6400移除硬碟後加入有問題
Itanium 伺服器
1753734
會員
4838
線上
108799
解決方案
論壇
類別
Company
Local Language
返回
論壇
討論平台
返回
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
部落格
信息
社區語言
語言
論壇
部落格
文章選項
- 訂閱此主題的RSS 提要
- 將此主題標記為未讀
- 將主題標記為已讀
- 將主題在本帳號置頂
- 標示為書籤
- 訂閱此主題
- 列印此頁
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 04-27-2006 08:31 PM
在 04-27-2006 08:31 PM
Smart Array 6400移除硬碟後加入有問題
HP Smart Array 6400-128 Controller (version 2.58)
raid 1 的config
我將其中一顆disk 移除之後,再加進去
用hpacucli 卻發現那顆disk 已經被判定為fail
所以無法rebuid,直到server reboot之後才會resync
用hpacucli 去rescan 也沒有用,請問該如何處理?
controller slot=1 physicaldrive all show
Smart Array 6400 in Slot 1
array A (Failed)
physicaldrive 1:0 (port 1:id 0 , Parallel SCSI, 73.4 GB, OK)
physicaldrive 1:1 (port 1:id 1 , Parallel SCSI, 0 Byte, Failed)
raid 1 的config
我將其中一顆disk 移除之後,再加進去
用hpacucli 卻發現那顆disk 已經被判定為fail
所以無法rebuid,直到server reboot之後才會resync
用hpacucli 去rescan 也沒有用,請問該如何處理?
controller slot=1 physicaldrive all show
Smart Array 6400 in Slot 1
array A (Failed)
physicaldrive 1:0 (port 1:id 0 , Parallel SCSI, 73.4 GB, OK)
physicaldrive 1:1 (port 1:id 1 , Parallel SCSI, 0 Byte, Failed)
3則回覆 3
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 04-27-2006 08:52 PM
在 04-27-2006 08:52 PM
Smart Array 6400移除硬碟後加入有問題
under M$ Windows ?
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 04-28-2006 02:43 AM
在 04-28-2006 02:43 AM
Smart Array 6400移除硬碟後加入有問題
try update the firmware.
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 04-28-2006 04:58 PM
在 04-28-2006 04:58 PM
Smart Array 6400移除硬碟後加入有問題
ES4 update3 on rx2620
我發現下列網只有跟我一樣的問題,不過他是在windows 上的,我有試著用 hpacucli 去rescan ,不過狀況依舊
Known Issues
The rebuild on internal HDD array will not start automatically. You can start the rebuild manually in two ways:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=1132643&swItem=is-39576-1&prodNameId=378439&swEnvOID=1060&swLang=13&taskId=135&mode=4&idx=0
我發現下列網只有跟我一樣的問題,不過他是在windows 上的,我有試著用 hpacucli 去rescan ,不過狀況依舊
Known Issues
The rebuild on internal HDD array will not start automatically. You can start the rebuild manually in two ways:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=1132643&swItem=is-39576-1&prodNameId=378439&swEnvOID=1060&swLang=13&taskId=135&mode=4&idx=0
以上表述為作者個人觀點,不代表惠普公司,使用本網站,請遵守網站使用規則和條款
© 版权所有 2024 慧与发展有限责任合伙企业