Smart Array 6400移除硬碟後加入有問題

[watermelonyu]

HP Smart Array 6400-128 Controller (version 2.58)

raid 1 的config

我將其中一顆disk 移除之後,再加進去

用hpacucli 卻發現那顆disk 已經被判定為fail

所以無法rebuid,直到server reboot之後才會resync

用hpacucli 去rescan 也沒有用,請問該如何處理?

controller slot=1 physicaldrive all show



Smart Array 6400 in Slot 1



array A (Failed)

physicaldrive 1:0 (port 1:id 0 , Parallel SCSI, 73.4 GB, OK)

physicaldrive 1:1 (port 1:id 1 , Parallel SCSI, 0 Byte, Failed)

[watermelonyu]

under M$ Windows ?

[watermelonyu]

try update the firmware.

[watermelonyu]

ES4 update3 on rx2620

我發現下列網只有跟我一樣的問題,不過他是在windows 上的,我有試著用 hpacucli 去rescan ,不過狀況依舊

Known Issues



The rebuild on internal HDD array will not start automatically. You can start the rebuild manually in two ways:







http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=1132643&swItem=is-39576-1&prodNameId=378439&swEnvOID=1060&swLang=13&taskId=135&mode=4&idx=0