Itanium Based Servers (Retired)
Showing results for 
Search instead for 
Do you mean 

HP Integrity RX1620 - Fatal BMC Error

Occasional Visitor

HP Integrity RX1620 - Fatal BMC Error

A few weeks ago, after a reboot for replacing HDs, our server for testing did not restart again. The errors:

 

This boot experienced the following problems:

WARNING[10]: BMC System Event Log is full

ERROR[19]: Failure writing BMC token on download

WARNING[22]: BMC token read fail on upload/init new BMC token on upload

WARNING[52]: A ROM revision is inconsistent with FIT or REVBLOCK

 

The boot will halt at the Boot Manager

Do not attempt to boot an O/S before fixing the error(s)

 

We try to clean the BMC log, using the console, but we couldn't.  We are thinking that the problem is the BMC card, because when we retired it, the same errors appeared.

 

Thank you for your help

2 REPLIES
Honored Contributor [Founder]

Re: HP Integrity RX1620 - Fatal BMC Error

You could try removing the AC power cords from the system and trying again.  This will fully reset the BMC circuitry.  You may also find more information in the MP Event Logs.

 

Regards,

Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!
HPE Pro

Re: HP Integrity RX1620 - Fatal BMC Error

 Hi ,

 

The Error Message Seems to be an   Firmware  Issue.

 

Updating Firmware to the  latest  may resolve the issue.

 

Note : Please check MP logs also

 

Regards,

Surendar

I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!