Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Itanium Based Servers (Retired)
cancel
Showing results for 
Search instead for 
Did you mean: 

rx4640 and rp7420 Connectivity question

KurtTJohnsonSr
Occasional Contributor

rx4640 and rp7420 Connectivity question

I am attaching both these servers to a WS6416 GBIC blade in a 6509 via the media interface converter Cisco WS-G5483=this converts the fiber signal to copper for connection to the host NIC.
The network traffic is error free.
BUT!
Is this supported? Has anyone ever done this?
1 REPLY
Highlighted
Dennis Handly
Acclaimed Contributor

Re: rx4640 and rp7420 Connectivity question

The proper forum for HP-UX servers is the ITRC forum: Servers > Integrity, 9000 or general
http://forums.itrc.hp.com/service/forums/categoryhome.do?categoryId=22