2650 routing question

[John H. Miller]

Can you 2650 do any sort of NAT routing? What I mean is, can I access a server on one network using an IP address from another network? Example:

Main network is 192.168.100.0/24. Lets say I have another routed segment of 192.168.90.0/24 and I have a server on that side at 192.168.90.2 that I want to be able to access from the main network by using 192.168.100.2. I know this can be done with a full router by setting up an inside NAT address, but can the 2650 do this as well. The reasoning is much more complex than I care to get into here.

Thanks! - John

[Fredrik Lönnman · Accepted solution]

No, the 2650 cant do NAT.

[John H. Miller]

That's what I thought. Thanks!