HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

2920-24G routing protocol.

 
Carva
Occasional Visitor

2920-24G routing protocol.

Hi Sir,

I would like to use a 2920-24G to deploy OSPF & RIP protocol.

May I know if do you have an example scenario of document to refer to?

 

Thanks.

C.

1 REPLY
akg7
HPE Pro

Re: 2920-24G routing protocol.

For OSPF
++++++++
ProVision(config)# ip router-id <router id>
ProVision(config)# router ospf
ProVision(ospf)# enable
ProVision(ospf)# area backbone
-or-
ProVision(ospf)# area 0.0.0.0
-or
ProVision(ospf)# area 0
ProVision(ospf)# vlan <vlan number>
ProVision(vlan-num)# ip ospf area backbone
-or-
ProVision(vlan-num)# ip ospf area 0.0.0.0
-or-
ProVision(vlan-num)# ip ospf area 0
ProVision(vlan-num)# router ospf
ProVision(config)# vlan <vlan number> ip ospf area backbone
-or-
ProVision(config)# vlan <vlan number>  ip ospf area 0
-or-
ProVision(config)# vlan <vlan number>  ip ospf area 0.0.0.0


For RIP
++++++++

ProVision(config)# router rip
ProVision(rip)# enable
ProVision(rip)# vlan <VLAN number> ip rip

I am an HPE Employee