LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

2930F Stack Reconvergence

 
SOLVED
Go to solution
Highlighted
Occasional Contributor

2930F Stack Reconvergence

We have two 2930F switches in a VSF stack. The stack link uses two of the SFP+ ports.

If the commander switch fails, how long does it take the standby to become the new commander?

Thanks

3 REPLIES 3
Highlighted
Respected Contributor

Re: 2930F Stack Reconvergence

Should be immediately

Highlighted
Occasional Contributor

Re: 2930F Stack Reconvergence

Thanks for the quick reply.

You say immediately but what are the course of events for the standby to become the commander and can this be measured, even if it is millisecs?

 

Highlighted
Respected Contributor
Solution

Re: 2930F Stack Reconvergence

The Standby member is already synced with the master, so if the master fails the standby member can become master immediatly. If you have a stack with more switrches then 2, one of the currrent members will become the new standby.

I don't think you can messure this, but i can tell you, you will not notice it.