3CR858-91 router reset

[oritbrimer]

Hi,

I'm using the 3CR858-91 router. Is there a way to reset the router without using the graphical interface? does the router support command line interface for example?

Thanks,

              Orit

[Techno]

1- Power OFF your router.

2- Disconnect all LAN cables

3- Loop the WAN port to a LAN port

4- Power up, wait 15 seconds

5- Job done, disconenct cables and the router should now be reset to default.

The Tech Man Has Spoken....

[Sebasc]

Hi Sylver,

It might be a long time you have published this answer but if you still online could please help me. I have tried to reset my router (the same 3CR858-91 model) as in the 3com instructions and your advise (wich is the same) but the router can't be reseted. I do not know if the problem could be that it is configured in a different network than by default (172.28.0.xxx). I used a stright RJ45 cable to reset it, is that ok?

My problem is that nobody knows it's admin password.

Thanks

Sebas