HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

3CREVF100-73 to 3CREVF100-73

 
ikar68
Occasional Visitor

3CREVF100-73 to 3CREVF100-73

Do not incorporate among themselves on IPSEC.



How it to carry out? Configuration IPSEC:



1.

Policy Name tunel1

Policy Type Auto

IPSec Mode Tunel

Local Gateway WAN1 Remote Gateway 10.163.249.34

Remote

FQDN

Local Site Subnet Remote Site Subnet

Local IP 192.168.1.0 Remote IP 192.168.2.0

Subnet Mask 255.255.255.0 Subnet Mask 255.255.255.0





Auto Policy



Local Id Type IP Adress Remote Id Type IP Adress

Identifier  86.110.163.238 Identifier  10.163.249.34

IKE Proposal

IKE Version Method

Exchange Mode Preshared key ********  (8 - 49 chars)

Encryption AES-256 HASH



DH SA-Lifetime (sec)



IPSec Proposal

Protocol ESP  

AH

Encryption AES-256 Authentication



PFS SA Lifetime









2.



Policy Name tunel1

Policy Type Auto

IPSec Mode Tunel

Local Gateway WAN1 Remote Gateway 86.110.163.238

Remote

FQDN

Local Site Subnet Remote Site Subnet

Local IP 192.168.2.0 Remote IP 192.168.1.0

Subnet Mask 255.255.255.0 Subnet Mask 255.255.255.0





Auto Policy



Local Id Type IP Adress Remote Id Type IP Adress

Identifier  10.163.249.34 Identifier  86.110.163.238

IKE Proposal

IKE Version Method

Exchange Mode Preshared key ********  (8 - 49 chars)

Encryption AES-256 HASH



DH SA-Lifetime (sec)



IPSec Proposal

Protocol ESP  

AH

Encryption AES-256 Authentication



PFS SA Lifetime







This message was edited by ikar68 on 12-18-09 @ 3:22 AM