HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
LAN Routing
Showing results for 
Search instead for 
Did you mean: 

3Com 3CRWER101U Firmware Problem

Occasional Visitor

3Com 3CRWER101U Firmware Problem

Hi there! I have recently updated the 3Com 3CRWER101U Wireless Router Firmware to V1.09, that I downloaded from 3Com WebSite. The update was successful, but there is a problem with that. Always, when I disconnect the router from alimentation, the configuration is loosed, and I have to reconfigure all the Router another time (or use a backup restore file each time). This is frustating, considering that sometimes the Router gets blocked and I have to hardware reset It. There is any problem with the last Firmware Release? In that case, where I can find the Original Firmware for this Router? Many thanks, regards,


Occasional Visitor

Re: 3Com 3CRWER101U Firmware Problem

Hi, I did the same firmware update, my problem is different. When I change Wi-Fi Channel from 6 to any other value, and press "save settings" all AP configuration is lost, rolling back to factory settings.

Any help? please email me at mfenoll @ gmail . com

Occasional Visitor

Re: 3Com 3CRWER101U Firmware Problem

This router has a number of problems as i see.

I described main in detail here in Spanish, also a good related post in English is in this blog.


There is an unreleased firmware V1.10 (Apr 16 2010 18:50:06) available for downloading in above links.


Hope this helps someone, best of luck!