Hi,
i configured and did stacking on two 2930 aruba switches.After configuration im getting this error., but im connected to right ports .
stack7# show vsf link detail
VSF Member: 1 Link: 1
Port State
-------- ------------
1/47 Error: Port connected to self
VSF Member: 1 Link: 2
Port State
-------- ------------
1/48 Up: Connected to port 2/47
VSF Member: 2 Link: 1
Port State
-------- ------------
2/47 Up: Connected to port 1/48
VSF Member: 2 Link: 2
Port State
-------- ------------
2/48 Error: No response from peer
VSF Domain ID : 10
MAC Address : f40343-6f0ecb
VSF Topology : Chain
VSF Status : Active
Uptime : 11d 21h 14m
VSF MAD : None
VSF Port Speed : 1G
Software Version : WC.16.04.0008
Name : stack7
Contact :
Location :
Member ID : 1
MAC Address : f40343-6f9c80
Type : JL256A
Model : Aruba JL256A 2930F-48G-PoE+-4SFP+ Switch
Priority : 128
Status : Commander
ROM Version : WC.16.01.0003
Serial Number : CN75HKX198
Uptime : 8d 20h 37m
CPU Utilization : 2%
Memory - Total : 347,763,200 bytes
Free : 229,590,636 bytes
VSF Links -
#1 : Inactive
#2 : Active, Peer member 2
Member ID : 2
MAC Address : f40343-6f0ec0
Type : JL256A
Model : Aruba JL256A 2930F-48G-PoE+-4SFP+ Switch
Priority : 128
Status : Standby
ROM Version : WC.16.01.0003
Serial Number : CN75HKX15P
Uptime : 0d 1h 14m
CPU Utilization : 0%
Memory - Total : 347,763,200 bytes
Free : 246,078,608 bytes
VSF Links -
#1 : Active, Peer member 1
#2 : Inactive
stack7# sh vsf topology
VSF member's interconnection with links:
Stby Cmdr
+---+ +---+
| 2 |1==2| 1 |
+---+ +---+
please helpme out
thanks :)
