Connecting HPE 1920s 24g 2sfp switch to ADSL router

[pingpong]

I recently purchased HPE Prolient ML350 Gen10 Server. It is not compatible with our existing Dlink 10/100 unmanaged switch. So, I am going to buy HPE 1920S 24G 2SFP switch.
I have Dlink DSL-2730U Router Modem. Can I connect this router to the HPE 1920S 24G 2SFP switch's ethernet port for internet access? I mean can use one of the 24 ethernet ports for uplinking purpose? will this connection works without any issue?

Connected Devices to the 1920s switch would be as follows:
One ML350 Gen10 server, 19 clients, one network printer and above mentioned ADSL Router Modem.

[mmilev]

Hi pingpong,

I understand you would like to use HPE 1920s 24G to connect an ADSL router and a ML30 Gen10 server.

This router as well as the server have Ethernet ports so if you connect them to HPE 1920s I do not believe it will be any compatibility issue.

The switch supports VLANs, 802.1q, static routing, ACLs, LACP, etc..

Please find more details below:

Supported Features – page 11 and management guide and software

https://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-a00003478en_us-6.pdf

https://techlibrary.hpe.com/OfficeConnect/?SKU=JL381A

Please have also a look below into the Data sheet:

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00002986enw

If you have any doubts you could refer to your local sales as well.

I hope this helps.

Best regards