LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

[HP 5900] OSPF with Virtual Routers ("vpn-instance")

fab2
Occasional Advisor

[HP 5900] OSPF with Virtual Routers ("vpn-instance")

Hi,

Has anybody ever tried to configure ospf with Virtual Routers ("vpn-instance") ?

In my network, OSPF with "vpn-instance" does not work properly.
LSA with remote addresses are received by the switch (according 'display osfp lsdb') but the routes are not integrated into the routing table.

Note: I configure "vpn-instances" for traffic isolation mainly ; there is NO MPLS or BGP in my config.

If I apply the same config WITHOUT the "vpn-instance" , ospf works fine : remote addresses are added to the routing table.

Config WITHOUT the "vpn-instance"  (=> routing table OK):

vlan 121
 name OM_BSP_1
interface vlan-interface 121
  ip address 10.153.18.18 30

ospf 1 router-id 1.1.2.1
 area 0.1.2.1
  nssa
  network 10.153.18.16 0.0.0.3

=> 'display ip routing-table' shows the routes to the remote addresses
=> ' 'display ospf routing' shows the remote addresses in the 'Routing for NSSAs' section


Config WITH the "vpn-instance"  (=> routing table NOK):

vlan 121
 name OM_BSP_1
interface vlan-interface 121
 ip binding vpn-instance OAM    <<-----
 ip address 10.153.18.18 30

ospf 1 vpn-instance OAM router-id 1.1.2.1    <<-----
 area 0.1.2.1
  nssa
  network 10.153.18.16 0.0.0.3

=> 'display ip routing-table' does NOT show the routes to the remote addresses
=> 'display ospf routing' does NOT show the remote addresses, there is NO 'Routing for NSSAs' section

Any idea ?

Thanks!