HP 5900af commands

[mosswalker]

I am lost. If I followed instructions and can ping the server on the vlan from the default lan .. How would vLan2 get access to the internet from the server? Do i need to create port 80 too?

[Switch] vlan 2

[Switch-vlan2] quit

[Switch] interface ten-gigabitEthernet 1/0/2

[Switch-Ten-GigabitEthernet1/0/2] port access vlan 2

[Switch-Ten-GigabitEthernet1/0/2] quit

[Switch] interface vlan-interface 2

[Switch-vlan-interface2] ip address 10.2.1.2 16

[Switch-vlan-interface2] quit

[Switch] udp-helper enable

[Switch] udp-helper port 55

[Switch] interface vlan-interface 1

[Switch-Vlan-interface1] udp-helper server 10.2.1.1

[Switch-Vlan-interface1] ip forward-broadcast