HP Procurve E3800 Vlan Routing

[jakeys1999]

Good day,

I have 4 HP Procurve E3800 switches stacked and I am attempting to configure vlans.  I am running into some issues with the routing between vlans. Default VLAN 192.168.4.204  VLAN 20 IP address 192.168.20.1 VLAN 60 192.168.60.1.

 Currently have vlan 20 IP PC's with one pc ip 192.168.60.200, another vlan 60 ID printers ip 192.168.60.200.   on the pc i can ping the ip of the vlan of 192.168.60.1 but am unable to ping the printer configured in vlan 60. 

VLAN ID Name                             | Status     Voice Jumbo
  ------- -------------------------------- + ---------- ----- -----
  1       DEFAULT_VLAN                     | Port-based No    No
  10      Servers                          | Port-based No    No
  20      PC's                             | Port-based No    No
  60      Printers                         | Port-based No    No

 Destination        Gateway         VLAN Type      Sub-Type   Metric     Dist.
  ------------------ --------------- ---- --------- ---------- ---------- -----
  0.0.0.0/0          192.168.4.1     1    static               1          1
  127.0.0.0/8        reject               static               0          0
  127.0.0.1/32       lo0                  connected            1          0
  192.168.4.0/24     DEFAULT_VLAN    1    connected            1          0
  192.168.20.0/24    PC's            20   connected            1          0
  192.168.60.0/24    Printers        60   connected            1          0

[Vince-Whirlwind]

What is the printer's default gateway address?