LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

HP5500 and two internet gateways

 
AdamN
Occasional Contributor

HP5500 and two internet gateways

Hi, i have an HP5500EI with is my core switch and is the gataway for all my pc and servers, behing it i have a cisco router and an checkpoint utm, is there i way i cans et the 5500 to be the gataways for all the PC and servers but set it for some host to use the checkpoint for internet and some to use the cisco?

2 REPLIES
Vince-Whirlwind
Honored Contributor

Re: HP5500 and two internet gateways

You could use VRF or policy based routing to do that.

With policy based routing, you use access lists to identify traffic by source address and route it accordingly.

With VRF, you associate some VLANs with one VRF, and other VLANs with the other. Each VRF has an independent routing table, and you will need to leak some routes between VRFs so devices can communicate.

AdamN
Occasional Contributor

Re: HP5500 and two internet gateways

I'm thinking obout PBR, can I setup acls as client list to use the second internet connection using PBR or i sould go with VRF?