HPE 1920s 48G

[Madson]

Dear, good afternoon.

I have 1 HPE 1920s 48g L3 switch with 4 vlans doing routing with each other normally.
I have a Sonicwall NSA 2600 firewall where switch port 48 is connected to NSA x0 port with ip 172.16.11.253/24.

My problem is that everything in vlan 5 the accesses the NSA  but the other vlans do not reach it. Could you help me with how to make this connection?

I already put the port in trunk, with all the vlans tagged, with Vlan 5 untaggede too tagged, I already put ip only on port 48 and nothing worked.

VLAN 2:
IP-10.0.0.254/29
Doors 1-5 Unttaged
VLAN 3:
IP - 192.168.168.254/24
Doors 6-20 Unttaged
VLAN 4:
IP - 172.16.10.254/24
Doors - 21-42 Unttaged
VLAN 5 -
IP - 172.16.11.254/24
Doors - 43-48

NSA 2600 - 

X0 -  172.16.11..253/24