HPE 5900 SNMPv3 MIB View

[basti23]

Hello

i was following HP guideline to configure SNMPv3 (https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c03148639),  but i have a question regarding mib-views.

in the HP example config is:

[Agent] undo snmp-agent mib-view ViewDefault  
[Agent] snmp-agent mib-view included test snmp  
[Agent] snmp-agent group v3 managev3group read-view test write-view test

my question, what happens in second line "snmp-agent mib-view included test snmp"? Are 2 new MIB-Views "test" and "snmp" created or are they pre-defined? If so, what are the possible values and to which MIBs do they grant access? 

If i execute "display snmp-agent mib-view" only ViewDefault is there, no other mib-views:

display snmp-agent mib-view
   View name: ViewDefault
       MIB Subtree: iso
       Subtree mask:
       Storage-type: nonVolatile
       View Type: included
       View status: active

   View name: ViewDefault
       MIB Subtree: snmpUsmMIB
       Subtree mask:
       Storage-type: nonVolatile
       View Type: excluded
       View status: active

   View name: ViewDefault
       MIB Subtree: snmpVacmMIB
       Subtree mask:
       Storage-type: nonVolatile
       View Type: excluded
       View status: active

   View name: ViewDefault
       MIB Subtree: snmpModules.18
       Subtree mask:
       Storage-type: nonVolatile
       View Type: excluded
       View status: active

 Thanks for your help in advance!