LAN Routing

Hpe 2530 Auto voice VLAN

 
xmatrix83
Occasional Contributor

Hpe 2530 Auto voice VLAN

Hi, I wanted to configure the 2520/2530 switch series with auto voice vlan, similar to what I did with the 1920/1930 office connect.
The scenario is very simple, vlan 1 untagged and auto vlan 100 for the voice, so in the phones I only have to enable the lldp because then the switch tags the packets automatically placing the phone traffic on the vlan 100.

The problem is that I do not find complete documentation for these switches, I only find this simple configuration:
vlan 100
name voip
voice
exit

In my opinion it is not enough for the auto voice vlan, I will have to configure the oui of the phones, but I can not find anything about it.
Can you help me?

3 REPLIES 3
akg7
HPE Pro

Re: Hpe 2530 Auto voice VLAN

Hello,

Sharing below link, hopefully it will help you:

https://community.hpe.com/t5/Comware-Based/auto-vlan-voip-2530/td-p/7118067#.YUXtdMvhUoA

Thanks!
Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the companyAccept or Kudo
xmatrix83
Occasional Contributor

Re: Hpe 2530 Auto voice VLAN

I'll check it out tomorrow and let you know.
Thanks

xmatrix83
Occasional Contributor

Re: Hpe 2530 Auto voice VLAN

unfortunately the project manager has postponed the voip configuration for next week.
As soon as I can do the configuration I inform you about the resolution.