INtervlan routing on a 8212Zl switch

[tawiggie]

I am trying to setup routing for a small towns shared network. I have an 8212Zl switch and I thought it would se simple to setup intervlan routing and make it work unfortinalty that is not the case. I have something wrong  inthe config to make it work but I am  nto sure what here is the config let me know if you can tell me what is wrong basically I cannot ping the gateway from any vlan when I put this config on the switch. let me know if there is anything else you need.

[Vince-Whirlwind]

What are these for?

ip route 10.1.0.0 255.255.0.0 10.1.1.1
ip route 172.16.1.0 255.255.255.192 172.16.1.2
ip route 172.16.1.64 255.255.255.192 172.16.1.67
ip route 172.16.1.128 255.255.255.192 172.16.1.130
ip route 172.16.1.192 255.255.255.192 172.16.1.252

get rid of them.

[Vince-Whirlwind]

I don't know why it's let you do this, but you appear to have VLAN1 untagged on each of the uplinks to the subnets which are on VLANs that are *ALSO* untagged on the same ports.

No idea how it let you do this, but you need to either tag your VLANs for distribution (and obviously tag the same VLAN on the remote switchport it connects to), or get rid of VLAN1 off these ports.