LAN Routing

Inter VLAN Routing 4208

New Member

Inter VLAN Routing 4208

I've been scouring the forums and, based on what I see, my configuration is correct - However, there is obviously something wrong because it does not work as intended.  Please see attachement for config file.  I have two VLANs.   VLAN 100 is being set up as a development network.  I can ping the gateway address of both VLANS but I cannot ping any clinets accross VLANS.  Also, I cannot ping the default route device from VLAN 100.  IP routing is enabled. 


Trusted Contributor

Re: Inter VLAN Routing 4208

You need to get rid of

ip default-gateway

ip route